10/02/2017 09:09:31

Cable - Secondary - Parking Brake

Correction code 33050302

Remove

  1. Make sure that park brake is fully released.
  2. Remove rear diffuser tray panel (refer to procedure).
  3. Disconnect park brake inner cables from caliper levers.
    Informational PurposesAn informational icon, calling your attention
    Note
    RH shown LH similar.
  4. Release cable rubber seal and disconnect park brake outer cable from calipers.
  5. Release the nuts (x2) securing the park brake secondary cable to RH cable abutment bracket.
  6. Screw lock nut along to the end of the cable adjustment threads and disconnect cable from the bracket.
  7. Loosen the nut securing the park brake secondary cable to LH abutment bracket and disconnect cable.
  8. Release outer cables from lower wishbone clips.
  9. Remove clip and clevis pin securing park brake primary cable to the park brake equalizer bracket.
  10. Disengage park brake.primary cable and remove equalizer bracket.
  11. Remove park brake cable.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Adjust park brake cable.