10/02/2017 09:09:31

Pipe - High Pressure - Condenser to Receiver Drier - Roadster 1.5

Correction code 18033502

Remove

  1. Recover the A/C refrigerant (refer to procedure).
  2. Remove HVAC controller (refer to procedure).
  3. Loosen unions securing pipe to condenser and receiver drier (torque 18 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent damage always use a suitable wrench to hold backing nut when loosening pipes and unions.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
  4. Remove bolts and nuts (x2) securing condenser to body (torque 12 Nm). Collect spacers (x4).
  5. Maneuver condenser up and forward to allow the high pressure pipe to be removed.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Replace all pipe O-rings.