10/02/2017 09:09:31

Parking Brake Lever

Correction code 33050102

Remove

  1. Remove rear center console trim (refer to procedure).
  2. Disconnect park brake lever switch connector.
  3. Remove the clevis pin and clip securing park brake primary cable to park brake lever mechanism.
  4. Remove Patchbolts (x3) securing park brake lever bracket to seat frame (torque 25 Nm).
  5. Remove bolts (x2) and Nyloc nuts (x2) securing park brake lever to bracket (torque 25 Nm).
  6. Remove park brake lever.

Install

Installation procedure is the reverse of removal, except for the following:

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION

Replace all nyloc nuts.

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION

Replace all patchbolts.