10/02/2017 09:09:31

Trunk Lid Assembly

Correction code 10113502

Remove

  1. Open trunk.
  2. Mark fitted position of trunk hinges to trunk lid.
  3. With assistance, remove bolts (x4) securing both hinges to trunk lid assembly.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    To avoid serious injury, support weight of component to prevent accidental closure.
  4. Remove trunk lid assembly.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    This component is heavy. Removal/Installation is a two person operation.
  5. Remove bolts (x4) and neoprene washers (x8) securing rear spoiler to trunk lid assembly.
  6. Remove rear spoiler.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Make sure that neoprene washers are used between trunk lid and spoiler to prevent water ingress.
  2. Position trunk hinges in marked locations.
  3. Check alignment of trunk lid to body and adjust as necessary.