10/02/2017 09:09:31

Coolant Manifold - Battery (Assembly Removed)

Correction code 46013103

Remove

  1. Using assistance, carefully rotate rotisserie to invert battery.
  2. Position absorbent cloth around hose connections.
  3. Note fitted position of red and gold hose clips and release clips (x44) securing hoses to manifold.
    Informational PurposesAn informational icon, calling your attention
    Note
    Remove front row clips before removing rear row clips.
  4. Carefully release hose from manifold.
  5. Remove nuts (x4) securing manifold to enclosure and remove manifold (torque 6 Nm).

Install

Installation procedure is the reverse of removal, except for the following:

  1. Make sure that hoses are installed on the correct manifold stubs.
  2. Make sure that the hoses are installed coolant manifold as far as possible and the hose clips are between 1mm and 3mm from the end of the hose.