10/02/2017 09:09:31

Stay - Seat Belt Anchorage Frame - LH

Correction code 30020202

Remove

  1. Remove LH trunk lid hinge (refer to procedure).
  2. Release clip securing strut to stay and remove strut.
  3. Open charge port door.
  4. Remove screws (x5) securing charge port connector to body and move connector aside.
  5. Remove nuts (x2) securing hinge bracket to stay and remove bracket (torque 20 Nm).
  6. Remove Patchbolt securing stay to subframe (torque 55 Nm).
  7. Remove cable ties (x2) securing harness to stay and position harness aside.
  8. Remove Patchbolt securing stay to seat belt mounting frame and remove stay (torque 55 Nm).

Install

Installation procedure is the reverse of removal, except for the following:

Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION

Replace all patchbolts.