10/02/2017 09:09:31

Module - TPMS Trigger - Rear - LH/RH

Correction code 34010802

Remove

  1. Raise and support vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove forward rear wheel arch liner (refer to procedure).
  3. Remove nuts (x2) securing TPMS trigger to bodyside.
    Informational PurposesAn informational icon, calling your attention
    Note
    LH shown RH similar.
  4. Release trigger from mounting studs and collect spacers.
  5. Disconnect TPMS connector and remove trigger.

Install

Installation procedure is the reverse of removal.