10/02/2017 09:09:31

Hoses - Any - Manifold to Battery (Assembly Removed)

Correction code 46013203

Remove

  1. Using assistance, carefully rotate rotisserie to invert battery.
  2. Position absorbent cloth around hose connections.
  3. Note fitted position of red and gold hose clips and release clips (x2) securing hose to sheet.
  4. Carefully release hose from sheet.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Make sure that the hoses are installed on sheet end fitting and coolant manifold as far as possible and the hose clips are between 1mm and 3mm from the end of the hose.