10/02/2017 09:09:31

Module - TPMS Control Unit

Correction code 34010602

Remove

  1. Remove upper dash panel (refer to procedure).
  2. Remove scrivets (x2) and remove LH face level vent duct. LHD illustrated, RHD similar.
    Informational PurposesAn informational icon, calling your attention
    Note
    Steering wheel removed for clarity. LHD only.
  3. Remove bolts (x2) securing TPMS control unit to dash and release TPMS control unit.
  4. Disconnect connector and remove TPMS control unit.
    Informational PurposesAn informational icon, calling your attention
    Note
    Apply recommended grease to connector before installation.

Install

Installation procedure is the reverse of removal.