10/02/2017 09:09:31

Transmission Fluid - Replace

Correction code 47030102

Drain & Refill

  1. The fluid should only be drained when the transmission is warm.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Observe due care when draining the transmission fluid as the fluid can be very hot.
  2. Remove middle undershield (refer to procedure).
  3. Position container to collect fluid.
  4. Clean area around filler/level plug.
  5. Remove filler plug.
  6. Remove drain plug and allow fluid to drain.
  7. Clean and fit drain plug (torque 10 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Inspect 'O' ring seal for damage and replace if necessary.
  8. Fill transmission with recommended fluid, until the fluid just runs from the hole. Allow sufficient time for the fluid to flow and reach a common level within the transmission.
  9. Clean and fit filler/level plug (torque 15 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Inspect 'O' ring seal for damage and replace if necessary.