29/12/2017 10:23:07

Pipe - Evaporator - Solenoid Valve to TXV - Roadster 2.x

Correction code 18034902

Remove

  1. Recover the A/C refrigerant (refer to procedure).
  2. Remove receiver drier (refer to procedure).
  3. Clean area around TXV.
  4. Remove screw securing pipe clamp to TXV (torque 10 Nm).
  5. Remove clamp and release pipe.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
  6. Loosen pipe union to solenoid valve (torque 18 Nm).
  7. Remove pipe.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Replace A/C pipe O-rings.
    Informational PurposesAn informational icon, calling your attention
    Note
    Lubricate new O-ring seals with clean refrigerant oil.