10/02/2017 09:09:31

Spring Plate - Door Check - LH

Correction code 10151402

Remove

  1. Remove the front upper wheel arch liner (refer to procedure).
  2. Remove bolts (x3) securing upper fender bracket to fender and body. Remove fender bracket.
  3. Release adhesive securing cover to hinge and remove cover.
  4. Release grommet securing door harness to body and withdraw harness from body.
  5. Disconnect door harness connectors (x2).
  6. Support weight of door. Remove bolts (x4) securing beam hinge to body and remove door assembly (torque 25 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Always record quantity and fitted position of shims, washers, locktabs or clips.
  7. Support door assembly for access to door hinge.
  8. Remove nuts and bolts (x2) securing check strap spring plate to door hinge, remove check strap spring plate, support and follower.

Install

Installation procedure is the reverse of removal.