10/02/2017 09:09:31

Reservoir - Windshield Washer

Correction code 17211102

Remove

  1. Remove front exit duct (refer to procedure).
  2. Remove 3 bolts securing reservoir to bumper armature.
  3. Lift and maneuver reservoir from bumper armature.
  4. Position container to collect spillage.
  5. Disconnect connector from washer pump.
  6. Disconnect washer tube and drain washer fluid from reservoir.
    Informational PurposesAn informational icon, calling your attention
    Note
    Place suitable absorbent material around the affected area to absorb any possible fluid spillage.
  7. Remove reservoir.

Install

Installation procedure is the reverse of removal.