29/12/2017 10:22:49

Condenser

Correction code 18033102

Remove

  1. Remove condenser front exit duct (refer to procedure).
  2. Remove condenser rear exit duct (refer to procedure).
  3. Evacuate refrigerant.
  4. Loosen union and disconnect condenser high pressure refrigerant pipe (torque 18 Nm).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    To prevent damage always use a suitable wrench to hold backing nut when loosening pipes and unions.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Plug pipe connections to prevent ingress of moisture or dirt.
  5. Loosen union and disconnect condenser low pressure refrigerant pipe (torque 25 Nm).
  6. Remove cable ties (x3) securing harness to body. Disconnect cooling fan connectors (x2).
  7. Remove bolts and nuts (x2) securing condenser to body (torque (torque 12 Nm) Nm).
  8. Remove condenser.
  9. Remove nuts and bolts (x4) securing cooling fans to condenser (torque 15 Nm).
  10. Remove cooling fans.
  11. Remove plastic spacers (x4) from condenser.

Install

Installation procedure is the reverse of removal, except for the following:

  1. Replace A/C pipe O-rings.