10/02/2017 09:09:31

Bushing - Sway Bar - Front

Correction code 31012202

Remove

  1. Raise vehicle and position wheels on blocks.
  2. Remove front undershield (refer to procedure).
  3. Remove front spring and damper assembly (refer to procedure).
  4. Remove bolts (x2) securing bracket to chassis (torque 25 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    When installing, apply Loctite®242™ thread locking compound to bolt/screw threads.
  5. Remove bracket and collect backing plate.
  6. Remove bushing from sway bar.
    Informational PurposesAn informational icon, calling your attention
    Note
    Apply recommended grease to bearing/bushing surfaces.

Install

Installation procedure is the reverse of removal.