10/02/2017 09:09:31

Duct - Fan to Shroud Assembly

Correction code 40011902

Remove

  1. Remove fan motor assembly (refer to procedure).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning

    Do not work on an incorrectly supported vehicle.

  2. Remove cable tie securing duct to lower shroud.
  3. Release duct from motor shroud and maneuver duct from vehicle through aperture in subframe.
  4. Collect spacers (x4).

Install

Installation procedure is the reverse of removal, except for the following:

  1. Make sure that the duct is correctly located on the spacers to prevent it from being squashed when the fan motor assembly is installed.