Suspension - Front (Inspection)
Código de corrección 31010700314 0.3 NOTA: Salvo que se indique lo contrario explícitamente en el procedimiento, el código de corrección y el FRT mencionados anteriormente reflejan todo el trabajo necesario para realizar este procedimiento, incluidos los procedimientos vinculados. No acumule códigos de corrección a menos que se le indique explícitamente que lo haga. NOTA: Consulte Tiempos de tarifa plana para obtener más información sobre los FRT y cómo se crean. NOTA: Consulte Protección personal para asegurarse de llevar el EPI adecuado al realizar el siguiente procedimiento. NOTA: Consulte Precauciones ergonómicas para ver información sobre prácticas de trabajo seguras.
- 2026-04-23: Released new procedure.
Inspection Summary
| Component | Inspection Description | Comment |
|---|---|---|
| Front Upper Control Arms (FUCA) | With wheels on the ground, turn the steering wheel left/right to check for FUCA creaking noise | See video FUCA Creaking Noise (step 1) |
| Front lateral links | With wheels on the ground, turn the steering wheel full lock left/right to check for lateral link clicking noise | See video Lateral Link Clicking Noise (step 1) |
| Front lateral links | While raising the vehicle, listen for creaks in the suspension | See video Lateral Link Creaking Noise (step 4) |
| Front aeroshield panel | Inspect for contact between lateral link and front aeroshield panel | See step 6 |
| Front ball joints (condition) | Visually inspect all front ball joints | See steps 8, 9, 11, 12, 14, 15 |
| Front ball joints (play) | Inspect for excessive play on all front ball joints | See steps 11, 12, 14, 15 |
| Front compliance links | Visually inspect compliance link bushings | See steps 10 and 13 |
| Front lateral link bushes | Turn steering wheel and inspect lateral link bushings | See steps 17 through 26 |
Inspection Details
-
Test for front suspension noise.
NotaWhile parked on the two post lift, before jacking up the vehicle, close all windows, release the brake pedal, and then turn the steering wheel to the left and right.
- While slightly turning the steering wheel to the left and right, listen for creaking noises, indicating FUCA issues. See Toolbox article #54817.
FUCA Creaking Noise
- While fully turning the steering wheel, listen for clicking noises near the end of the turning cycle, indicating front lateral link issues. See Toolbox article #6960000.
Lateral Link Clicking Noise
- While slightly turning the steering wheel to the left and right, listen for creaking noises, indicating FUCA issues. See Toolbox article #54817.
- Lower the LH front window.
-
Prepare the vehicle for lifting. See Elevación del vehículo - Elevador de 2 columnas.
-
Inspect the front lateral links for noise.
NotaDuring raising the vehicle, pay attention to creaking noises while the vehicle is being raised, before the front wheels leave the floor. This is an indication of front lateral link wear. Confirm their condition in later steps.
- Fully raise the vehicle.
-
Inspect the front aero shield for contact with the lateral link.
NotaCheck whether the front aero shield is touching the LH and/or RH front lateral link. Perform rework as per SB-24-12-009 when this is not yet done.
- Remove the front aero shield panel. See Panel - Deflector aerodinámico - Delantero (Desinstalación y sustitución).
-
Inspect the LH front ball joints.
NotaVisually Inspect the ball joint for cracks, grease leakage, unseated boot and/or boot puncture.
-
Inspect the RH front ball joints.
NotaVisually Inspect ball joints for cracks, grease leakage, unseated boot and/or boot puncture.
-
Inspect the inner bushing of the LH compliance link.
NotaInspect for unusual cracks. Pry to test for excessive movement. If cracking is found in the red highlighted area, then proceed to replacement.
-
Inspect LH compliance link to knuckle ball joint
NotaInspect the ball joint for cracks, grease leakage, unseated boot, boot puncture, and ball joint free play. Replace any damaged component
-
Inspect the LH lateral link to knuckle ball joint.
NotaInspect the ball joint for cracks, grease leakage, unseated boot, boot puncture, and ball joint free play. Replace any damaged component
-
Inspect the inner bushing of the RH compliance link.
NotaInspect for unusual cracks. Pry to test for excessive movement. If cracking is found in the red highlighted area, then proceed to replacement.
-
Inspect the RH compliance link to knuckle ball joint.
NotaInspect ball joint for cracks, grease leakage, unseated boot, boot puncture, and ball joint free play. Replace any damaged component.
-
Inspect the RH lateral link to knuckle ball joint.
NotaInspect ball joint for cracks, grease leakage, unseated boot, boot puncture, and ball joint free play. Replace any damaged component.
- Lower the vehicle until the tires are touching the ground.
- Turn the steering wheel fully to the left.
-
Lock the steering wheel into position.
- Fully raise the vehicle.
-
Inspect the inner bushing of the RH lateral link.
NotaInspect for unusual cracks. Pry to test for excessive movement. If cracking is found in the red highlighted area, then proceed to replacement.
- Lower the vehicle until the tires are touching the ground.
- Remove the steering wheel holder.
- Turn steering wheel fully to the right.
-
Lock the steering wheel into position.
- Fully raise the vehicle.
-
Inspect the inner bushing of the LH lateral link.
NotaInspect for unusual cracks. Pry to test for excessive movement. If cracking is found in the red highlighted area, then proceed to replacement.
- Install the front aero shield panel. See Panel - Deflector aerodinámico - Delantero (Desinstalación y sustitución)
- Fully lower the vehicle.
- Remove the steering wheel holder.