2025-09-11
Dual Lock Pad - Liftgate - LH (Model YL) (Remove and Replace)
Correction code
12270100702
FRT
0.24
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the LH trough trim. See Trim - Trough - LH (Model YL) (Remove and Replace).
-
Remove the dual lock pad from the LH trough trim.
- Use glue cleaner and IPA wipes to clean off any remaining adhesive.
Install
-
Align the dual lock pad with the alignment lines on the LH trough trim, and then
install the pad to the LH trough trim.
- Install the LH trough trim. See Trim - Trough - LH (Model YL) (Remove and Replace).