2025-09-11

B-Cover - Center Outer - 3rd Row (Model YL) (Remove and Replace)

Correction code 13090101502 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Model YL) (Remove and Replace).
  2. Release the tabs (x10) to remove the 3rd row center outer B-cover from the center inner B-cover.
    Informational PurposesAn informational icon, calling your attention
    Note
    Release from the upper portion of the outer B-cover, and then work downwards to release the remaining tabs.

Install

  1. Secure the tabs (x10) to install the 3rd row center outer B-cover to the center inner B-cover.
    Informational PurposesAn informational icon, calling your attention
    Note
    Install from the lower portion of the outer B-cover, and then work upwards to secure the remaining tabs.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure all the tabs are fully seated and locked.
  2. Install the 3rd row seat cushion. See Cushion - Seat - 3rd Row (Model YL) (Remove and Replace).