2026-04-20
B-Cover Inboard Inner - 2nd Row - LH (7-Seate) (Remove and Replace)
Correction code NEW NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the inboard outer trim from 2nd row LH seat cushion assembly. See Trim - B-Cover Inboard Outer - 2nd Row Seat - LH (7-Seat) (Remove and Replace).
-
Remove B-cover inboard inner
assembly.
TIpUse of the following tool(s) is recommended:
- Torx T25 socket
Install
-
Install B-cover inboard inner
assembly.
1.5 Nm (1.1 lbs-ft)TIpUse of the following tool(s) is recommended:- Torx T25 socket
- Install the inboard outer trim to 2nd row LH seat cushion assembly. See Trim - B-Cover Inboard Outer - 2nd Row Seat - LH (7-Seat) (Remove and Replace).