2025-09-12

Bumper Stop - Liftgate (Body Side) - LH (Model YL) (Remove and Replace)

Correction code 11332901502 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open the liftgate.
  2. Release the tabs (x2) to remove the liftgate belt bumper stop from the body.

Install

  1. Check if the fixing tabs of the liftgate belt bumper stop is intact. If the tabs are damaged, install a new liftgate belt bumper stop.
  2. Press the liftgate belt bumper stop onto the body and secure the tabs (x2).
  3. Close the liftgate.