2026-04-15

Panel - Seat Back - 2nd Row Seat - LH (Model YL) (Remove and Replace)

Correction code 13080200102 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open the LH rear door and lower the LH rear window.
  2. Move the LH 2nd row seat forward.
    Informational PurposesAn informational icon, calling your attention
    Note
    Adjust the seat back if needed.
  3. Release the clips (x18) that attach the LH 2nd row seat seat back panel to the seat assembly, and then remove the seat back panel from the seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use a plastic trim tool to release the lower clips (x2) first, and then work around to release the remaining clips.
    Informational PurposesAn informational icon, calling your attention
    Note
    When removing the upper clips, partially open the shell and then use a pry tool to release the upper clips from the inside.
    Informational PurposesAn informational icon, calling your attention
    Note
    Check and replace any damaged clips.

Install

  1. Install the clips (x18) that attach the LH 2nd row seat seat back panel to the seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure that all the clips are fully engaged.
    Informational PurposesAn informational icon, calling your attention
    Note
    Check and replace any damaged clips.
  2. Move the LH 2nd row seat back to its original position.
  3. Raise the LH rear window and close the LH rear door.