2025-09-11
Headrest - 3rd Row Seat - LH (Model YL) (Remove and Replace)
Correction code
13060100602
FRT
0.18
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the 3rd row LH seat back panel assembly. See Panel - Seat Back - 3rd Row Seat - LH (Model YL) (Remove and Replace).
-
Release the hooks (x3) that attach the 3rd row LH seat headrest cable to the seat
back shell.
-
Release the clips (x2) that attach the 3rd row LH seat headrest cable to the cable
lock.
-
Use long needle nose pliers (1082478-03-A) to locate the clip on the outboard
recliner stopper of the 3rd row LH seat, rotate it counterclockwise, then pull the
headrest cable outward to release it.
-
Simultaneously press the guide button and insert a 90-degree pick (1115191-00-A) into
the guide opening, then lift the headrest upward while engaged.
NoteFor ease and safety, it’s recommended to have an assistant help.
Install
-
Align the posts of the headrest with the holes in the seat back. Press the headrest
in firmly so that it is fully seated with a click.
-
Align the 3rd row LH seat headrest cable with the slot, insert it using long needle
nose pliers, then rotate it clockwise to secure and install it to the outboard recliner
stopper.
-
Install the clips (x2) that attach the 3rd row LH seat headrest cable to the cable
lock.
-
Install the hooks (x3) that attach the 3rd row LH seat headrest cable to the seat
back shell.
- Install the 3rd row LH seat back panel assembly. See Panel - Seat Back - 3rd Row Seat - LH (Model YL) (Remove and Replace).