Rear Upper Cover - Center Console (Model YL) (Remove and Replace)

Correction code 15190202302 FRT 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: Cup Holder Sub Assembly - 2nd Row (Model YL) (Remove and Replace) / Rear Upper Cover - Center Console (Model YL) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x6) that attach the cup holder sub assembly to the rear upper cover	1.2 Nm (.9 lbs-ft)	Torx T20 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse