2026-01-08

Seat Back - Complete - 3rd Row (Model YL) (Remove and Replace)

Correction code 13060100302 FRT 0.60 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Install

  1. Install the 3rd row seat back complete. See Seat Back - Complete - 3rd Row (Model YL) (Remove and Install).
  2. Locally connect a laptop with Toolbox 3 to the vehicle. See Toolbox (Connect and Disconnect).
  3. Click the Actions tab, type "PROC_VCLEFT_X_3R-SEAT-RECLINE-CALIBRATION" into the search field, click PROC_VCLEFT_X_3R-SEAT-RECLINE-CALIBRATION, click Run, and allow the routine to complete.
  4. Type "PROC_VCRIGHT_X_3R-SEAT-RECLINE-CALIBRATION" into the search field, click PROC_VCRIGHT_X_3R-SEAT-RECLINE-CALIBRATION, click Run, and allow the routine to complete.
  5. Disconnect the laptop.
  6. On the touchscreen, press and hold the Exit Service Mode button to exit Service Mode Plus.