2025-09-11

Panel - Seat Back - 3rd Row Seat - LH (Model YL) (Remove and Replace)

Correction code 13090100302 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the trunk load floor. See Trunk Load Floor (Model YL) (Remove and Replace).
  2. Release the clips (x10), hooks (4) and tabs (x7) that attach the LH 3rd row seat seat back panel to the seat assembly, and then remove the seat back panel from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use a plastic trim tool to release the upper right clips first, and then work around to release the remaining clips.

Install

  1. Position the LH 3rd row seat back shell to the seat and attach the hooks (x4) to the frame rail, and then install the clips (x10) and tabs (x7) that attach the LH 3rd row seat seat back panel to the seat assembly
    Informational PurposesAn informational icon, calling your attention
    Note
    Make sure that all the clips are fully engaged.
    Informational PurposesAn informational icon, calling your attention
    Note
    Check and replace any damaged clips.
  2. Install the trunk load floor. See Trunk Load Floor (Model YL) (Remove and Replace).