2025-09-11

Trim - C-Pillar - Lower - LH (Model YL) (Remove and Replace)

Correction code 15180100102 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open the LH rear door and lower the LH rear window.
  2. Partially release the lower section of the LH rear primary door seal.
  3. Pry the lower C-pillar trim upwards to release the clips and the guide tab, and then remove the lower trim from the vehicle.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Wear cut-resistant gloves when performing this step to avoid personal injury.

Install

  1. Align the guide tab on the lower C-pillar trim to the locating holes on the vehicle, and then press the trim down to secure the clips.
  2. Install the lower section of the LH rear primary seal to the vehicle and make sure it is properly seated.
  3. Raise the LH rear window and close the LH rear door.