Torque Specifications - Interior Trim

Table 1. Torque Specifications: Airwave Assembly - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x2) that attach the airwave assembly to the rear display
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Replace 1096312-00-C
Screws (x2) that attach the airwave assembly to the vent cover panel assembly
0.8 Nm (7 lbs-in)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 2. Torque Specifications: Armrest Hinge Assembly - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x4) that attach the hinge assembly to the armrest outer assembly
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 3. Torque Specifications: Center Console (Without the Key Card Assembly) (6-Seat) (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes

Bolts (x2) that attaches the LH and RH rear of the center console to the body

Bolts (x4) that attach the LH and RH front exterior of the center console to the body
6 Nm (4.4 lbs-ft)
  • 10 mm deep socket
 Reuse
Table 4. Torque Specifications: Closeout - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screw that secures the center console closeout to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 5. Torque Specifications: Cup Holder Assembly - 2nd Row (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x6) that attach the 2nd row cup holder assembly to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 6. Torque Specifications: Cup Holder Sub Assembly - 2nd Row (Model YL) (Remove and Replace) / Rear Upper Cover - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x6) that attach the cup holder sub assembly to the rear upper cover
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 7. Torque Specifications: Display Module - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x5) that secure the display module
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Replace 1096312-00-A
Table 8. Torque Specifications: Lower Support Bracket - Speaker - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x6) that attach the lower speaker support bracket to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 9. Torque Specifications: Rear End Module - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x6) that attach the rear end module assembly to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Bolt that attaches the rear end module assembly to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Replace 1096312-00-A
Table 10. Torque Specifications: Sliding Door Assembly - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x12) that attach the sliding door assembly to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 11. Torque Specifications: Top Face Panel - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x4) that attach the top face panel to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 12. Torque Specifications: Air Duct - B-Pillar - Upper - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x4) that attach the air duct to the LH B-pillar upper trim assembly
1.3 Nm (1.0 lbs-ft)
  • Torx T20 socket
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 13. Torque Specifications: Air Duct - B-Pillar - Upper - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x4) that attach the air duct to the LH B-pillar upper trim assembly
1.3 Nm (1.0 lbs-ft)
  • Torx T20 socket
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 14. Torque Specifications: Trim - C-Pillar - Upper - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the 2nd row LH lower seat belt anchor to the body
35 Nm (25.8 lbs-ft)
  • 13 mm socket
  • Torque wrench with angle measurement
 Replace
Table 15. Torque Specifications: USB Hub Duo - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x2) that secure the USB hub duo
1.2 Nm (.9 lbs-ft)
  • Torx T10 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 16. Torque Specifications: VCUSB Assembly - Center Console (Model YL) (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts (x4) that attach the VCUSB to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 17. Torque Specifications: Vent Cover Panel - Center Console - Premium (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x2) that attach the airwave assembly to the rear display
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Replace 1096312-00-C
Screws (x2) that attach the airwave assembly to the vent cover panel assembly
0.8 Nm (7 lbs-in)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Screws (x3) that attach the rear display to the vent cover panel assembly
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Replace 1096312-00-A
Table 18. Torque Specifications: Insulator - Rear Quarter Panel - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH body harness ground strap to the LH rear quarter panel
10 Nm (7.4 lbs-ft)
  • 10 mm deep socket
 Reuse
Table 19. Torque Specifications: Insulator - Rear Quarter Panel - RH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the RH body harness ground strap to the RH rear quarter panel
10 Nm (7.4 lbs-ft)
  • 10 mm socket
 Reuse
Table 20. Torque Specifications: Duct - C-Pillar - Upper - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x3) that attach the LH C-pillar upper trim duct to the body
1.3 Nm (1.0 lbs-ft)
  • Torx T20 socket
 Reuse
Table 21. Torque Specifications: Air Vent - C-Pillar - Upper - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x3) that attach the LH C-pillar upper trim air vent to the body
1.3 Nm (1.0 lbs-ft)
  • Torx T20 socket
 Reuse
Table 22. Torque Specifications: Ramp - Airbag - B-Pillar - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear coat hook to the headliner
2.5 Nm (1.8 lbs-ft)
  • Torx T25 socket
 Reuse
Bolt that attaches the headliner to the body
2 Nm (1.5 lbs-ft)
  • Torx T30 socket
 Reuse
Bolts (x2) that attach the LH B-pillar airbag ramp to the body
5 Nm (3.7 lbs-ft)
  • 10 mm deep socket
 Reuse
Table 23. Torque Specifications: Audio Speaker - Middle - Headliner - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear coat hook to the headliner
2.5 Nm (1.8 lbs-ft)
  • Torx T25 socket
 Reuse
Bolt that attaches the headliner to the body
2 Nm (1.5 lbs-ft)
  • Torx T30 socket
 Reuse
Bolts (x2) that attach the LH middle headliner audio speaker to the headliner
0.65 Nm (6 lbs-in)
  • Torx T10 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 24. Torque Specifications: Audio Speaker - Rear - Headliner - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear coat hook to the headliner
2.5 Nm (1.8 lbs-ft)
  • Torx T25 socket
 Reuse
Bolts (x2) that attach the LH rear headliner audio speaker to the headliner
0.65 Nm (6 lbs-in)
  • Torx T10 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 25. Torque Specifications: Light - Dome - 3rd Row Seat - LH (Model YL) (Remove and Install)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear coat hook to the headliner
2.5 Nm (1.8 lbs-ft)
  • Torx T25 socket
 Reuse
Screw that attaches the LH 3rd row seat dome light to the headliner
0.65 Nm (6 lbs-in)
  • Torx T10 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse
Table 26. Torque Specifications: Ramp - Airbag - C-Pillar - LH (6-Seat) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear coat hook to the headliner
2.5 Nm (1.8 lbs-ft)
  • Torx T25 socket
 Reuse
Bolt that attaches the LH C-pillar airbag ramp to the body
5 Nm (3.7 lbs-ft)
  • 10 mm deep socket
 Reuse
Table 27. Torque Specifications: Coat Hook and Map Light Assembly - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that attaches the LH rear coat hook to the headliner
2.5 Nm (1.8 lbs-ft)
  • Torx T25 socket
 Reuse
Bolt that attaches the LH front headliner to the vehicle
2 Nm (1.5 lbs-ft)
  • Torx T30 socket
 Reuse
Bolts (x5) that attach the LH coat hook and map light assembly to the vehicle
1 Nm (.7 lbs-ft)
  • Torx T20 socket
 Reuse
Bolts (x2) that attach the LH coat hook and map light assembly to the vehicle
2.5 Nm (1.8 lbs-ft)
  • Torx T20 socket
 Reuse
Table 28. Torque Specifications: Insulator - Wheelhouse - Front - LH (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolt that secures the busbar cover access door
9 Nm (6.6 lbs-ft)
  • Insulated 10 mm socket
 Reuse
Bolts (x2) that attach the charge port busbar kit to the HV header
9 Nm (6.6 lbs-ft)
  • Insulated 10 mm socket
 Reuse
Table 29. Torque Specifications: Headliner - Front (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that attach the rear coat hooks to the headliner
2.5 Nm (1.8 lbs-ft)
  • Torx T25 socket
 Reuse
Bolts that attach the headliner to the body
2 Nm (1.5 lbs-ft)
  • Torx T30 socket
 Reuse