2025-09-11
Trunk Tub (Model YL) (Remove and Replace)
Correction code
15301600402
FRT
0.12
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the trunk load floor. See Trunk Load Floor (Model YL) (Remove and Replace).
- Remove the trunk sill trim. See Trunk Sill Lower Trim (Remove and Replace).
- Remove the LH and RH load floor brackets. See Bracket - Load Floor - LH (Model YL) (Remove and Replace).
-
Release the push clips (x2), and then
remove the trunk tub.
Install
-
Position the trunk tub into the
vehicle, and then install the push clips (x2).
- Install the LH and RH load floor brackets. See Bracket - Load Floor - LH (Model YL) (Remove and Replace).
- Install the trunk sill trim. See Trunk Sill Lower Trim (Remove and Replace).
- Install the trunk load floor. See Trunk Load Floor (Model YL) (Remove and Replace).