2025-11-25
Center Console (Without the Key Card Assembly) (Model YL) (Remove and Replace)
Correction code
15190201702
FRT
0.42
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the center console from the vehicle. See Center Console (Without the Key Card Assembly) (6-Seat) (Remove and Install).
Replace
- Install the center console into the vehicle. See Center Console (Without the Key Card Assembly) (6-Seat) (Remove and Install).
- Locally connect a laptop with Toolbox to the vehicle. See Toolbox (Connect and Disconnect).
- Reinstall the vehicle software. See Software Reinstall - Touchscreen.
- In Toolbox, click the Actions tab, type "hvac actuator" into the search field, click TEST-SELF_VCUSB_X_HVAC-ACTUATORvia Toolbox:(link), click Run, and allow the routine to complete.
- Disconnect the laptop and exit Service Mode Plus. See Service Mode Plus.