2026-04-30
Heat Pad - Cushion- Driver Seat (Model YL) (Remove and Replace)
Correction code
13010703102
FRT
1.08
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Warning
Seat base edges are
sharp and can cause personal injury. Wear cut resistant gloves when removing the seat
from the vehicle, and while performing procedures that involve work on or near the seat
base.
Note
If the foam pad is damaged during occupancy sensor
and/or heat pad removal, replace the foam pad.
Remove
-
Remove the driver seat cushion foam
heat pad from the seat cushion foam. See Foam - Cushion - Driver Seat (Model YL / Model Y Performance) (Remove and Replace).
Install
- Install the driver seat cushion foam heat pad to the seat back foam, and then install the seat cushion assembly to the vehicle. See Foam - Cushion - Driver Seat (Model YL / Model Y Performance) (Remove and Replace).