2025-09-12

Tail Lights - Lamp - Center High Mount Stop Light (Model YL) (Remove and Replace)

Correction code 17401800102 FRT 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the spoiler access panel. See Tail Lights - Lamp - Spoiler Access Panel (Model YL) (Remove and Replace).
  2. Remove the screws (x4) that attach the center high mount stop light to the spoiler assembly.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T25 socket
  3. Release the locator pins (x4) that attach the center high mount stop light to the spoiler assembly, and then remove the light from the spoiler assembly.

Install

  1. Position the center high mount stop light to the spoiler assembly, and then install the locator pins (x4) that attach the light to the spoiler assembly.
  2. Install the screws (x4) that attach the center high mount stop light to the spoiler assembly.
    2.5 Nm (1.8 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T25 socket
  3. Install the spoiler access panel. See Tail Lights - Lamp - Spoiler Access Panel (Model YL) (Remove and Replace).