2025-09-11

Speaker Grille - Cup Holder (Model YL) (Remove and Replace)

Correction code 15190200002 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open the LH front door and lower the LH front window.
  2. Move the LH front seat forward.
  3. Open the LH rear door and lower the LH rear window.
  4. Pry the cup holder speaker grille horizontally backward to release the clips (x4), and then remove it from the center console.
    Informational PurposesAn informational icon, calling your attention
    Note
    Be careful not to damage the guide pins (x7).

Install

  1. Align the guide pins (x7) on the cup holder speaker grille to the holes on the center console, and then horizontally push the speaker grille forward to secure the clips (x4).
  2. Move the LH front seat to its original position.
  3. Raise the LH windows and close the LH doors.