2025-09-11

Trim - Upper - Liftgate (Model YL) (Remove and Replace)

Correction code 15110100002 FRT 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open the liftgate.
  2. Release the clips (x10), locator pins (x7), and tabs (x2) that attach the liftgate upper trim to the liftgate, and then remove the trim from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use a plastic trim tool to release the side clips first and the upper clips last.

Install

  1. Install the liftgate upper trim from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Check and replace any damaged clips before installation.
    Informational PurposesAn informational icon, calling your attention
    Note
    Align and install the locator pins on the top portion of the trim first, and then install the rest part of the trim.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the tabs are aligned with the liftgate lower trim.
  2. Close the liftgate.