Wheel Alignment (Model Y L)
Note
All specifications given in
degrees en decimals. For alignment racks using degrees, minutes and seconds use
the values in brackets.
Note
The Model 3 and Model Y
vehicles do not have dedicated adjustment points for camber and caster. Instead,
camber and caster are adjusted by manipulating the suspension lash and slop. The
real-world accuracy of these adjustments is achieved by installing 68 kg (150
lbs) ballast bags to simulate the presence of a driver and front passenger.
Performing this service procedure without ballast bags compromises the
real-world accuracy of the adjustments.
| Parameter | With Ballast | Without Ballast | ||
|---|---|---|---|---|
| Front | Rear | Front | Rear | |
| Camber |
-0.50° +/- 0.45° |
-1.20° +/- 1.0° |
-0.30° +/- 0.45° |
-1.00° +/- 1.0° |
| Camber Split |
+/- 0.60° |
+/- 0.80° |
+/- 0.60° |
+/- 0.80° |
| Caster |
5.70° +/- 1.0° |
Not applicable |
5.70° +/- 1.0° |
Not applicable |
| Caster Split |
+/- 1.0° |
Not applicable |
+/- 1.0° |
Not applicable |
| Individual Toe |
OUT 0.05° +/- 0.15° |
IN 0.20° +/- 0.15° |
IN 0.03° +/- 0.15° |
IN 0.17° +/- 0.15° |
| Toe Split |
+/- 0.10° |
+/- 0.10° |
+/- 0.10° |
+/- 0.10 |
| Track Width (at wheel center height)1580 mm |
19"/20" factory wheels: 1636/1624 mm |
19"/20" factory wheels: 1636/1624 mm |
19"/20" factory wheels: 1636/1624 mm |
19"/20" factory wheels: 1636/1624 mm |
| Coil Ride Height Note When measuring
the coil ride height, measure 75 mm inward from the ski hole in
each corner of the Battery. See the image below. |
172 +/- 5 mm |
172 +/- 5 mm |
184 +/- 5 mm |
182 +/- 5 mm |
| Wheelbase |
3040 mm |
|||