2025-09-12

Headrest Post Guide - Driver Seat (Model YL) (Remove and Replace)

Correction code 13010702902 FRT 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the driver seat headrest frame mechanism. See Frame Mechanism - Headrest - Driver Seat (Model YL) (Remove and Replace).
  2. Remove the tabs (x2) and locator pins (x2) that attach the driver seat upper substrate to the driver seat back frame, and then remvoe the substrate from the vehicle.
  3. Release the bayonets (x2) on both sides of the driver seat headrest post guide, and then remove the post guide from the vehicle.

Install

  1. Install the driver seat headrest post guide to the driver seat frame, and engage the bayonets (x2) to fully secure the post guide.
  2. Align the driver seat upper substrate to the driver seat headrest post guide, and then install the tabs (x2) and locator pins (x2) that attach the substrate to the driver seat back frame.
  3. Install the driver seat headrest frame mechanism. See Frame Mechanism - Headrest - Driver Seat (Model YL) (Remove and Replace).