2025-09-12
Cover - Busbar Module 2 To Pyrofuse - Ancillary Bay (Model Y L) (Remove and Replace)
Correction code 16300502102 FRT 2.52 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the PCS2 Lite. See PCS2 Lite - Ancillary Bay (Model YL) (Remove and Replace).
-
Remove the HV joint insulator for
positive busbar module 2 to pyrofuse.
-
Release the clips (x4) securing the positive busbar module 2 to pyrofuse cover.
Replace
-
Fasten the clips (x4) securing the positive busbar module 2 to pyrofuse cover.
-
Install the HV joint insulator for positive busbar module 2 to pyrofuse.
- Install the PCS2 Lite. See PCS2 Lite - Ancillary Bay (Model YL) (Remove and Replace).