2025-09-11

Top Face Panel - Center Console (Model YL) (Remove and Replace)

Correction code 15190200702 FRT 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: Top Face Panel - Center Console (Model YL) (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Screws (x4) that attach the top face panel to the center console
1.2 Nm (.9 lbs-ft)
  • Torx T20 bit
  • Digital Torque Screwdriver 0.10Nm - 2.0Nm
 Reuse

Remove

  1. Remove the center console LH and RH front side panels. See Side Panel - Front - Center Console - LH (Model YL) (Remove and Replace).
    Informational PurposesAn informational icon, calling your attention
    Note
    The number of clips of the LH and RH front side panels may be different.
  2. Remove the center console LH and RH rear side panels. See Side Panel - Rear - Center Console - LH (Model YL) (Remove and Replace).
  3. Remove the phone dock surround. See Surround - Phone Dock - Center Console (Remove and Replace).
  4. Remove the LH and RH hockey sticks. See Hockey Stick - Center Console - LH (Remove and Replace).
  5. Remove the screws (x4) that attach the top face panel to the center console.
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 bit
    • Digital Torque Screwdriver 0.10Nm - 2.0Nm
  6. Release the clips (x4) and remove the top face panel from the center console.

Install

  1. Secure the clips (x4) to install the top face panel to the center console.
  2. Install the screws (x4) that attach the top face panel to the center console.
    1.2 Nm (.9 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • Torx T20 bit
    • Digital Torque Screwdriver 0.10Nm - 2.0Nm
  3. Install the LH and RH hockey sticks. See Hockey Stick - Center Console - LH (Remove and Replace).
  4. Install the phone dock surround. See Surround - Phone Dock - Center Console (Remove and Replace).
  5. Install the center console LH and RH rear side panels. See Side Panel - Rear - Center Console - LH (Model YL) (Remove and Replace).
  6. Install the center console LH and RH front side panels. See Side Panel - Front - Center Console - LH (Model YL) (Remove and Replace).