2025-09-11

Rear End Panel - Lower - Center Console (Model YL) (Remove and Replace)

Correction code 15190201602 FRT 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open all doors and lower all windows.
  2. Move both front seats forward.
  3. Pry the lower rear end panel assembly horizontally backward to release the clips (x5) and tabs (x2).
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not pull the assembly too far away from the center console. The harness is still connected to its back.
    Informational PurposesAn informational icon, calling your attention
    Note
    Be careful not to damage the guide pins (x3).
  4. Disconnect the cup holder speaker connector.

Install

  1. Connect the cup holder speaker connector.
  2. Align the guide pins (x3) on the lower rear end panel assembly to the holes on the center console, and then horizontally push the panel assembly forward to secure the clips (x5) and tabs (x2).
  3. Move both front seats to original position.
  4. Raise all windows and close all doors.