2025-09-12
Turbine Aero Insert - Wheel - Front - LH (Model Y L) (Remove and Replace)
Correction code 34010100102 FRT 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the wheel cover from the LH front wheel. See Cap - Wheel (Model YL) (Remove and Replace).
- Remove the LH front wheel. See Wheel Assembly (Remove and Install).
-
Remove the turbine aero inserts (x7) from the LH front wheel by using the provided
plastic pry tool to carefully pry from the outer side, releasing 28 clips in total (4
per insert).
Replace
-
Remove the protective packing bags from the new turbine aero inserts (x7).
-
Clean the turbine aero inserts (x7) with IPA wipes, allowing 1 minute to dry.
-
Install the turbine aero inserts (x7) to the LH front wheel, ensuring all 28 clips (4
per insert) are fully seated.
NotePlace the insert with holes at the valve core position.
- Install the LH front wheel. See Wheel Assembly (Remove and Install).
- Install the wheel cover to the LH front wheel. See Cap - Wheel (Model YL) (Remove and Replace).