2025-09-11

Harness - Headliner (Model YL) (Remove and Replace)

Correction code 17102100002 FRT 1.68 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the front headliner. See Headliner - Front (Model YL) (Remove and Replace).
  2. Disconnect the front overhead console connector.
  3. Disconnect the front headliner map light connectors (x2).
  4. Disconnect the front headliner speaker connectors (x4).
  5. Disconnect the front headliner microphone connectors (x6).
  6. Disconnect the 3rd row seat dome light connectors (x2).
  7. Release the clips (x30) and the tapes (x3) to remove the headliner harness from the front headliner.
    Informational PurposesAn informational icon, calling your attention
    Note
    Partially lift the NVH cotton to loosen the front headliner harness. Be careful not to damage the NVH cotton.

Install

  1. Secure the clips (x30) and the tapes (x3) to install the headliner harness to the front headliner.
    Informational PurposesAn informational icon, calling your attention
    Note
    Apply new tape as needed.
  2. Connect the 3rd row seat dome light connectors (x2).
  3. Connect the front headliner microphone connectors (x6).
  4. Connect the front headliner speaker connectors (x4).
  5. Connect the front headliner map light connectors (x2).
  6. Connect the front overhead console connector.
  7. Install the front headliner. See Headliner - Front (Model YL) (Remove and Replace).