2025-07-15

Outboard Side Shield Carrier - 2nd Row - LH (6 Seat) (Remove and Replace)

Correction code TBD FRT 0.72 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Remove the seat cushion pad assembly from the LH 2nd row seat assembly. Trim - Cushion - 2nd Row Seat - LH (Model YL) (Remove and Replace).
  2. Remove the push clips (x3) securing the outboard side shield carrier to the LH 2nd row seat cushion frame assembly.
  3. Remove the outboard side shield carrier from the LH 2nd row seat cushion frame by releasing the location tabs (x3).
    Informational PurposesAn informational icon, calling your attention
    Note
    Avoid excessive force to prevent damage to decorative pieces.

Install

  1. Align the location tabs (x3) and install the outboard side shield carrier to the LH 2nd row seat cushion frame assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Avoid excessive force to prevent damage to decorative pieces.
  2. Install the push clips (x3) securing the outboard side shield carrier to the LH 2nd row seat cushion frame assembly.
  3. Install the seat cushion pad assembly to the LH 2nd row seat assembly. Trim - Cushion - 2nd Row Seat - LH (Model YL) (Remove and Replace).