2026-03-17
Antenna - Amplifier FM/DAB (Model Y L) (Remove and Replace)
Correction code
TBD
FRT
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the rear headliner. See Rear Headliner (Model YL) (Remove and Replace).
-
Disconnect the electrical
connectors (x2) from the FM/DAB antenna amplifier.
-
Remove the bolt that
attaches the FM/DAB antenna amplifier to the body, and then remove the
amplifier from the vehicle.
TIpUse of the following tool(s) is recommended:
- 10 mm socket
Install
-
Position the FM/DAB antenna amplifier
to the vehicle, and then install the bolt that attaches the amplifier to the body.
8 Nm (5.9 lbs-ft)TIpUse of the following tool(s) is recommended:- 10 mm socket
-
Connect the electrical connectors (x2) to the FM/DAB antenna
amplifier.
- Install the rear headliner. See Rear Headliner (Model YL) (Remove and Replace).