2025-09-11
Angle Adjuster Cover - 3rd Row - LH (Model YL) (Remove and Replace)
Correction code
13090101202
FRT
0.18
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the 3rd row LH seat cushion bolster. See Bolster - Seat Cushion - 3rd Row - LH (Model YL) (Remove and Replace).
-
Lift the 3rd row LH seat angle adjuster cover up, and then pull it forward to release
the tabs (x3) that attach it to the inner B-cover.
Install
-
Insert the 3rd row LH seat angle adjuster cover backwards, confirm the alignment of
the position, and then press it downward to secure the tabs (x3) that attach the
adjuster cover to the inner B-cover.
- Install the 3rd row LH seat cushion bolster. See Bolster - Seat Cushion - 3rd Row - LH (Model YL) (Remove and Replace).