2025-09-12
Heat Pad - Seat Back - 2nd Row - LH (Model YL) (Remove and Replace)
Correction code
13080203102
FRT
0.72
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Remove the LH 2nd row seat back trim assembly from the seat back foam assembly, and then discard the foam with heat pad on it. See Trim - Seat Back - 2nd Row - LH (Model YL) (Remove and Replace).
Install
-
Install a new seat back heat pad onto a new seat back foam assembly.
NoteEnsure the heat pad is securely adhered to the seat back foam assembly.
- Install the LH 2nd row seat back trim assembly to the seat back foam assembly. See Trim - Seat Back - 2nd Row - LH (Model YL) (Remove and Replace).