트림 - 볼스터 - 내측 - 시트 - 2열 - LH(탈거 및 교체)
Correction code
13084702
0.18
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make
sure wearing proper PPE when performing the below procedure.NOTE:
See 인체공학적 주의 사항for safe
and healthy working practices.
탈거
- Remove the LH 2nd row inner bolster substrate. See 서브스트레이트 - 볼스터 - 내측 - 2열 - LH(탈거 및 교체).
-
Remove the LH 2nd row seat inner bolster trim from the bolster foam.
장착
-
Install the LH 2nd row seat inner bolster trim on the bolster foam.
- Install the LH 2nd row inner bolster substrate. See 서브스트레이트 - 볼스터 - 내측 - 2열 - LH(탈거 및 교체).