2026-08-09

아플리케 - 리프트게이트(전 세계 공통)(탈거 및 교체)

교정 코드 12207022 0.12 메모: 절차에서 명시적으로 언급하지 않는 한 교정 코드 및 해당 관련 FRT는 연결된 절차를 포함하여 이 절차를 수행하는 데 필요한 모든 작업을 반영합니다. 명시적으로 지시하지 않는 한 교정 코드를 누적하지 마십시오. 참고: FRT와 그 생성 방법에 대한 자세한 내용은 표준 정비 작업시간의 내용을 참조하십시오. 참고: 아래 절차를 수행할 때 적절한 PPE를 착용했는지 확인하려면 개인 보호의 내용을 참조하십시오.

참고
이 절차는 이 부품의 전역 새로 고침 버전을 위한 것입니다. 이 부품의 원래 버전에 대한 절차는 여기에 있습니다. 아플리케 - 리프트게이트(탈거 및 교체).

탈거

  1. Carefully release the clips (x5) that attach the liftgate applique to the liftgate, and then remove the applique from the vehicle.
    참고
    Use a plastic trim tool to release the clips.

장착

  1. Clean the mating surfaces of the liftgate applique with an Isopropyl Alcohol (IPA) wipe.
    참고
    Clean away any residue.
    참고
    Use your thumb to help roll off the adhesive.
    참고
    Allow 1 minute for the IPA to dry before continuing to the next step.
  2. Install the applique tape onto the applique bracket.
    경고
    Be wary not to cover the rear facing camera.
    참고
    Peel away the tape when the liftgate applique is to be installed
  3. Install the liftgate applique.
    참고
    x5 clips.
    참고
    Peel away the tape when ready to install the applique.
    참고
    Align the applique using pin. Start by fastening the center clips, and then work your way out.
    참고
    Use the seam roller to seat the adhesive areas.