Actuator - Cinching - Liftgate (Remove and Replace)
Correction code
11352202
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make
sure wearing proper PPE when performing the below procedure.NOTE:
See 인체공학적 주의 사항for safe
and healthy working practices.
- Open liftgate
-
Remove lower liftgate trim
참고8x clips, 2x connectors, Be careful not to hang or drop quickly to prevent damage to connectors
-
Disconnect liftgate high force cinching actuator connector
참고1x connector, Press locking tabs to release
-
Remove bolts securing liftgate high force cinching actuator to liftgate
참고3x bolts, T20, Torque?
-
Remove liftgate high force cinching actuator from liftgate and disconnect cable
참고2x holding tabs
-
Connect cable to liftgate high force cinching actuator and position actuator into liftgate
참고2x holding tabs
-
Install bolts securing liftgate high force cinching actuator to liftgate
참고3x bolts, T20, Torque?
-
Connect liftgate high force cinching actuator connector
참고1x connector, Engage locking tabs
-
Install lower liftgate trim
참고8x clips, 2x connectors
- Close liftgate