Latch - Liftgate (Remove and Replace)
Correction code
11355002
0.12
NOTE: Unless
otherwise explicitly stated in the procedure, the above correction code and
FRT reflect all of the work required to perform this procedure, including
the linked procedures. Do
not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are
created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See 개인 보호 to make
sure wearing proper PPE when performing the below procedure.NOTE:
See 인체공학적 주의 사항for safe
and healthy working practices.
- Open liftgate
-
Remove lower liftgate trim
참고8x clips, 2x connectors, Be careful not to hang or drop quickly to prevent damage to connectors
-
Release liftgate latch power release cable from liftgate
참고1x holding tab
-
Disconnect liftgate latch power release connector
참고1x connector
-
Remove bolts securing liftgate latch power release to liftgate
참고2x bolts, T30, 10 Nm
-
Remove liftgate latch power release from liftgate and release liftgate high force cinching actuator cable
참고2x holding tabs
-
Connect liftgate high force cinching actuator cable to liftgate latch power release and position into liftgate
참고2x holding tabs
-
Install bolts securing liftgate latch power release to liftgate
참고2x bolts, T30, 10 Nm
-
Connect liftgate latch power release connector
참고1x connector
-
Install liftgate latch power release cable to liftgate
참고1x holding tab
-
Install lower liftgate trim
참고8x clips, 2x connectors
- Close liftgate