2026-01-08

Stone Guard (Remove and Replace)

Korrigeringskode 18200332 FRT 1.14 MERK: Hvis ikke noe annet er uttrykkelig oppgitt i prosedyren, gjenspeiler korrigeringskoden og FRT ovenfor, alt arbeidet som kreves for å gjennomføre denne prosedyren, inkludert de tilknyttede prosedyrene. Ikke stable korrigeringskoder med mindre du bli uttrykkelig bedt om det. MERK: Se Flat rate-tider for å lære mer om FRT-er og hvordan de lages. Hvis du vil gi tilbakemelding om FRT-verdier, kan du sende en e-post til ServiceManualFeedback@tesla.com. MERK: Se Personlig beskyttelse for å forsikre deg om at du bruker riktig PVU når du gjennomfører prosedyren nedenfor. Se Forholdsregler for ergonomi for trygge og sunne arbeidspraksiser.

  • 2025-12-29: Released new procedure.

Fjerne

  1. Remove the cooling fan module assembly. See Modul – kjølevifte (fjerne og montere).
  2. Release the locking tabs (x14) that attach the active grille shutter to the cooling fan and shroud assembly, and then remove the active grille shutter.
  3. Release the locking tabs (x4) that attach the radiator to the fan and shroud assembly, and then slide the radiator out of the holding mounts.
  4. Release the clips that attach the stone guard to the radiator, and then slide the stone guard out to remove it from the radiator.

Montere

  1. Align the tabs of the stone guard with the guide datums, and then install the clips that attach the stone guard to the radiator.
  2. Install the locking tabs (x4) that attach the radiator to the fan and shroud assembly.
  3. Install the active grille shutter onto the cooling fan and shroud assembly, and then fasten the locking tabs that attach the shutter to the assembly.
  4. Install the cooling fan module assembly. See Modul – kjølevifte (fjerne og montere).
  5. Perform a cooling system vacuum refill. See Kjølesystem (vakuumfylling).
  6. Install the underhood storage unit. See Oppbevaringsrom under panser (fjerne og skifte ut).